Ask Proxima DLP Projector Guide de l'utilisateur télécharger pdf (Page 30)

Using the audio

Using the projector’s speakers

To use the projector’s speaker, connect your source to the Audio In connec-

tors (L and/or R) on the projector’s composite connectors.

To adjust the volume, press the Volume buttons on the keypad or remote.

To mute the sound, press the Mute button on the remote.

Troubleshooting Audio

If you aren’t hearing the audio, check the following:

• Make sure the audio cable is connected.

• Make sure mute is not active (press the Mute button on the remote).

• Make sure the volume is turned up enough. Press the Volu me button

on the keypad or remote.

• Make sure the correct source is active.

• Make sure that you are connected to an “audio out” connector on the

source as opposed to a “line-in” or “microphone” connector.

• Adjust the audio source.

• If playing a video, make sure the playback has not been paused.

Connecting external speakers

The projector can be attached to external amplified speakers by connecting a

3.5mm stereo audio cable from the Audio Out connector on the projector to

the amplified speakers. Alternatively, you can bypass the projector’s audio

system and connect the audio directly from your source to a stereo or home

theater system.

connect audio cable

adjust volume

external speakers

speaker

cable

audio out

with own power source

http://www.pureglare.com.au

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Pas de commentaire

Ask Proxima DLP Projector Guide de l'utilisateur Page 30